1505 W 1st Ave, STE A. Broomfield, CO 80020
Mon-Wed: 10am - 5 | Thur-Fri: 11am - 6pm | Sat: 11am - 5pm
1997 Matchless DC-30 Combo with Cover-Burgundy
|
|
|
|
|
|
|
| Quantity: | |
| Manufacturer #: | DC-30 Combo |
| Sku: | CON2023-CM-030 |
Add to Cart | |
;){kind=link}
1997 Matchless DC-30 Combo with Cover-Burgundy
1997 Matchless DC-30 Combo with Cover-Burgundy
An Early Matchless DC-30 in excellent condtion. Nice looking with Burgundy tolex. Comes with cover and manual.
Will sell matching 1997 set of DC-30 Combo and RV-1 for $ 7000 PICKUP ONLY!
The DC-30 was the company’s first design and still leads the lineup.
30W from a quartet of EL-84’s, through two channels, each with unique voicing and tone control layouts. True “Class A” configuration.
Features includes: highly interactive tone controls and circuitries unique to each channel, bypassable master volume, individual channel effects loops, cut control for high frequency shaping, high and low (30 or 15 watt) power settings, selectable output impedance and phase inverter switches allow the use of additional speaker cabinets or amps in-phase with the DC-30.
The preamp sections are based on a layout of two 12AX7’s in Channel 1 and one EF86 in Channel 2. The two 12AX7’s in Channel 1 create a parallel-triode circuit with interactive bass and treble. The one EF86 in Channel 2 consists of a high-gain pentode coupled to a six-position tone switch. The power amp is fed by a 12AX7 phase inverter, which drives four EL84 power tubes. The rectifier circuit gives you the flexibility of using one 5AR4 for a quick attack or you can use two 5V4’s for a smooth, round response. Other professional features include an effects loop, half power-mode switch (a conservative 30 watts switching to 15 watts), output impedance selector (4, 8, 16 ohms) and a speaker phase-reverse switch.
Sound on the 212 Combo is delivered through two dissimilar Celestion speakers: a G12H30 and a Greenback 25, each specially modified through a proprietary MATCHLESS formula. All of this is encased in an extremely sturdy hand-made 11-ply, 3/4” Baltic birch cabinet, wrapped in richly textured black vinyl. The finishing touch is our signature backlit nameplate and control panel, which lets you (and the audience) know when the power is on.
Ch1. Controls: Volume, Bass, Treble
Ch2. Controls: Volume, Tone, Cut control, Bypassable master volume
Features: Dual inputs for each channel, Effects loop
Switches: Reverse speaker phase, Hi-lo power, 3 Position rotary Impedance, 6 Position rotary tone
Power Tubes: 4 x EL84
Preamp Tubes: 1 x EF86, 3 x 12AX7
Rectifier: 1 x 5AR4 or 2 x 5V4G tubes
Speaker Outs: Switchable Impedance of 4, 8, and 16 Ohms
Dimensions: 27" (w) x 21" (h) x 10.5" (d), 83lbs
An Early Matchless DC-30 in excellent condtion. Nice looking with Burgundy tolex. Comes with cover and manual.
Will sell matching 1997 set of DC-30 Combo and RV-1 for $ 7000 PICKUP ONLY!
The DC-30 was the company’s first design and still leads the lineup.
30W from a quartet of EL-84’s, through two channels, each with unique voicing and tone control layouts. True “Class A” configuration.
Features includes: highly interactive tone controls and circuitries unique to each channel, bypassable master volume, individual channel effects loops, cut control for high frequency shaping, high and low (30 or 15 watt) power settings, selectable output impedance and phase inverter switches allow the use of additional speaker cabinets or amps in-phase with the DC-30.
The preamp sections are based on a layout of two 12AX7’s in Channel 1 and one EF86 in Channel 2. The two 12AX7’s in Channel 1 create a parallel-triode circuit with interactive bass and treble. The one EF86 in Channel 2 consists of a high-gain pentode coupled to a six-position tone switch. The power amp is fed by a 12AX7 phase inverter, which drives four EL84 power tubes. The rectifier circuit gives you the flexibility of using one 5AR4 for a quick attack or you can use two 5V4’s for a smooth, round response. Other professional features include an effects loop, half power-mode switch (a conservative 30 watts switching to 15 watts), output impedance selector (4, 8, 16 ohms) and a speaker phase-reverse switch.
Sound on the 212 Combo is delivered through two dissimilar Celestion speakers: a G12H30 and a Greenback 25, each specially modified through a proprietary MATCHLESS formula. All of this is encased in an extremely sturdy hand-made 11-ply, 3/4” Baltic birch cabinet, wrapped in richly textured black vinyl. The finishing touch is our signature backlit nameplate and control panel, which lets you (and the audience) know when the power is on.
Ch1. Controls: Volume, Bass, Treble
Ch2. Controls: Volume, Tone, Cut control, Bypassable master volume
Features: Dual inputs for each channel, Effects loop
Switches: Reverse speaker phase, Hi-lo power, 3 Position rotary Impedance, 6 Position rotary tone
Power Tubes: 4 x EL84
Preamp Tubes: 1 x EF86, 3 x 12AX7
Rectifier: 1 x 5AR4 or 2 x 5V4G tubes
Speaker Outs: Switchable Impedance of 4, 8, and 16 Ohms
Dimensions: 27" (w) x 21" (h) x 10.5" (d), 83lbs
Contact Us
1505 W 1st Ave, STE ABroomfield, CO 80020
Phone: 303-484-1271
Mon-Wed 10:00 am - 4:00 pm
Thur-Fri 11:00 am - 6:00 pm
Sat 11:00 am - 5:00 pm
